You will need:
Step 1 You will need five timber panels to create your bike rack. Your panel sizes will depend on the size of your bike frame. For our dimensions, see “Project” credits below. Measure and cut timber to size. You could do this yourself or ask at your local hardware store to cut it for you.
Step 2 Use holesaw to cut a hole (that is larger than the diameter of your bike frame) 5cm from the edge of each of the two side panels. Cut two straight lines, 4cm apart, from the edge of each panel into the hole to create a mushroom shape – this is where your bike will be supported. Lightly sand edges smooth.
Step 3 Drill three pilot holes along the top and bottom edges of the side and back panels. These holes will act as a guide for the screws.
Step 4 Assemble the box rack, gluing panels together using liquid nails. When glue is dry, drill screws into pre-drilled holes to ensure box is sturdy.
Step 5 Mark the desired position of the rack on your wall, then mark and drill four holes in the back of the box and into the wall. Insert dynabolt or suitable fixture and tighten to secure rack to wall. (Note: fixing method will depend on your wall type.)
Step 6 Mount your bike and store your helmet and fave mags on top.
Download the step-by-step diagram here.