You will need:

• Pressed-tin panel
• Pencil & tape measure
• Tin snips (we used Trojan 300mm Tinsnips, $20.78, Bunnings)
• Medium sandpaper (80-grit)
• Paintbrush
• Undercoat & paint
• Selleys “Liquid Nails”, $8.95 for 250g, Bunnings

Step 1 Measure the size of the drawer fronts.

Step 2 With a pencil and tape measure mark the size of the drawer fronts on the tin panel.

Step 3 Use tin snips to cut carefully along the marked lines of the panels. Sand sharp edges until they are smooth.

Step 4 Paint drawer fronts with undercoat. Allow to dry, then paint a second coat.

Step 5 Paint the front of the panels in your chosen colour or colours. Leave to dry, then paint a second coat. Let dry.

Step 6 Apply liquid nails adhesive to the back of one panel, then press it onto the drawer front. Remove the panel and leave it for a few minutes to become “tacky”. Reattach panel to the drawer front, applying firm, even pressure, especially around the edges (you may need a friend to help you). Repeat for remaining drawer fronts.

Step 7 Wipe off any excess adhesive around the edges and allow 2 hours for the adhesive to dry. Voila! A bespoke chest of drawers.